
Full Digital Color Doppler Ultrasonic Diagnostic Instrument (Vet) User’s Manual V1.00
- 62 -
Chapter Eighteen Body Mark, Puncture guide and Lithotripsy
Body mark indicates the probing part and probe scanning direction when patient receiving inspection, it
plays an illustration role for the image.
18.1 Enter/exit body mark
Press freeze key to freeze image, press
key to enter “Select Body Mark” interface, image area
shows alternative body mark.
Press
key again, close the body mark menu and exit body mark status.
18.1.1 Classification of body mark
Classification of body mark is associated with the application mode, namely, each application mode has
its own body mark. Body marks are divided into 7 categories, a total of 27 kinds.
18.1.2 Operation of body mark
Operation of body mark includes selection of body mark, operation of probe mark.
1. Select body mark
In the body mark selection interface, move the trackball to the desired pictogram, press
『
Set
』
key, the
selected pictogram is shown on the lower left corner of image area.
2. Operate probe mark
“ ”-shaped mark on the pictogram indicates the direction of the probe. Move the trackball to make
the mark “ ” to the desired positon.
Turn
【
Value
】
knob, rotate the direction of probe mark, press
『
Set
』
key to confirm, the icon of probe
direction is “ ”.
3. Delete the body mark
Sees to “
17.3 Delete text comment
”.
18.2 Enter/exit puncture guide
In real time B mode, press
key to enter puncture guide interface, image area shows two puncture
guide lines.
Press
key to exit puncture guide line status.
18.2.1 Operation of puncture guide line
1. In puncture guide interface, press
key to change the start position of the first puncture guide line,
press
key to change the angle of the first puncture guide line.
2. Press
key to switch puncture guide line, press
key to change the start position of the second
puncture guide line, press
key to change the angle of the second puncture guide line,
Press
key to exit the puncture guide status.
18.3 Operation of Lithotripsy
1. In real time B mode, press F1 key to enter “Display” menu, rotate
knob or move the cursor
or operate the up/down direction keys to select “ESWL Line” menu, press
『
Set
』
key to open the
ESWL line.
2. ESWL line appears on the center of screen, at the same time the measurement depth of ESWL “X:
0.0mm” is shown at the lower right corner in real-time, operate trackball or up/down direction keys
to positioning ESWL depth;
3. Press
key to exit the ESWL line status.
Attention:
During the operation of puncture guide, do not freeze the image.
Attention:
Must ensure the correctness of body mark. The wrong body mark may cause
misdiagnosis.