Full Digital Color Doppler Ultrasonic Diagnostic Instrument (Vet) User’s Manual V1.00
- 68 -
5. Press
key on the keyboard of the instrument to open
【
System Preset
】
menu, move the cursor to
select
『
Net Setting
』
, press
『
Set
』
key to show the “Net Preset” dialog box, the default setting as shown on
the Figure:
Fig. the Default Network Setting
Description:
(1)
Use the following IP address
Set the network properties of Full Digital Color Doppler Ultrasonic Instrument:
IP address: IP address of the instrument;
Subnet mask: Subnet mask;
Default gateway: IP address of gateway.
(2) LAN Server Set
Set LAN server’s network properties:
IP address: IP address of LAN server;
TCP Port: the default is 8866.
(3)
DICOM Server Set
Set Dicom server’s network properties:
IP address: IP address of Dicom server;
TCP Port: the default is 104.
6. In the “Net Preset” dialog box, it doesn’t need to set the network. Move the cursor to select “Verify
Settings” button marked on the LAN Server Set, press
『
Set
』
key, it will pop up success prompt box,
press
「
OK
」
in the prompt box, the LAN server set is successful, the icon at the lower right corner of
the screen will changed from
to
, it indicates that the network is successful, you can achieve
the network printing function. If prompt fails, please check the IP address and TCP port, as well as the
network cable is properly connected.
7. In the Measure menu, select the corresponding measurement report, press
〖
Print Report
〗
, you can
print out various examnine diagnositc report.