
Full Digital Color Doppler Ultrasonic Diagnostic Instrument (Vet) User’s Manual V1.00
- 13 -
“Probe selection” key.
8. Current application mode
Display the current using application mode, such as: abdomen.
6.4 Menu adjustment region
Mainly display control menus of image adjustment and optimization parameters, and through relevant
keys and trackball to adjust and control; in addition, this region will also display measurement module
menus, text annotation and other menus.
6.5 Image region
Display images in all kinds of modes; also display measurement scale, various texts, arrows, gray scale,
color scale and other marks.
6.6 Image parameters display region
The upper right of image region always displays the operation parameters of current scanning image. In
real-time scanning, operation parameters are displayed as follows:
No. Operation mode
Display parameters (take 3.5MHz probe for example)
1
B mode
G96, F3.5
In turn: B image gain, work frequency
2
B/B mode
G96, F3.5
In turn: B image gain, work frequency
3
B/M
G96, F3.5
In turn: Image gain, work frequency
4
M
G96, F3.5
In turn: Image gain, work frequency
5
CFM
G96, F3.5
In turn: B image gain, work frequency
G85, F3.3, WF150, PRF1000
In turn: C image gain, CFM frequency, wall filter, pulse repetition frequency
6
PDI
G96, F3.5
In turn: B image gain, work frequency
G85, F3.3, WF150, PRF1000
In turn: C Image gain, CFM frequency, wall filter, pulse repetition frequency
7
PW
G96, F3.5
In turn: B image gain, work frequency
G85, F3.3, WF150, PRF1000
In turn: C image gain, CFM frequency, wall filter, pulse repetition frequency
G120, F3.3, WF50, A30, PRF3500, SV1.5
In turn: P image gain, PW frequency, wall filter, deflection angle, pulse
repetition frequency, sample volume
6.7 Measured result display region
Measurement and calculation results are located in the lower right of the image area, which are used to
show the being measured values and corresponding results. Measured values are usually real-time display. In
the measurement process, move the cursor, the measured values will real-time refresh. After finishing
measurement, measured values will be fixed display, while the associated application calculation will display
the corresponding results.
6.8 Status prompt region
Display the status information of equipment (such as volume, network connection and USB connection,
etc.) and display the cine playback status (the number of total frames stored by manual/automatic and the
status information of the current frame).