
Full Digital Color Doppler Ultrasonic Diagnostic Instrument (Vet) User’s Manual V1.00
- 69 -
8. Freeze the current interface, press
key to enter ultrasound report interface. Open the file in the D
disk or U disk, press
〖
Print report
〗
button, a variety of ultrasound reports saved in the D disk or U disk
will be printed out.
9. Freeze the current interface, press
key to enter image management interface. Open the file in the
D disk or U disk, press
〖
〗
button, the images or reports saved in the D disk or U disk will be
printed out.
Note: In the “Direct Line to the Ultrasound” way, the computer cannot connect to the Internet
network.
Line to the network
Schematic: Line to the network
1. Open the DCU12 Full Digital Color Doppler Ultrasonic Diagnostic Instrument.
2. Using a network cable to connect the network port of the instrument to the switch, the network port of
computer also connects to the switch, and then installs the printer on your computer, the printer sets
for sharing;
3. Copy the CD files “Network Printer_V2.0” to PC, open the folder of Network Printer_V2.0, and right
click the icon
to select “Run as administrator” to open the software.
4. In the Network Printer software, click the system setting icon
, select the way “Line to the network”,
click
button. In the “Network param setting”, the default value is 8866; generally it does not
need to re-set. The network parameter of ultrasonic diagnostic instrument automatically appears, as
shown on the Figure 1:
Attention:
1. In Windows XP operating system, directly double click the icon
to open
the software; In Win 7, Win 8 operating system, you need to right click and choose “Run
as administrator” to run the software.
2. When you run the Network Printer.exe first time, please close the Windows Firewall or
Anti-virus software, if pop-up the Windows Security Alert or appears unknown
program, choose the all access or unblock, the software can run normally.