
Full Digital Color Doppler Ultrasonic Diagnostic Instrument (Vet) User’s Manual V1.00
- 12 -
Chapter Six Work Main Interface
6.1 Startup and Shutdown
First connect the power supply, and then press the button
on the bottom of screen to start the
machine, it will display the B-mode image on the screen.
If you want to turn off the machine, please press the button
again, then pull out mains plug from
the supply mains.
Note: Please do not directly unplug the power adapter when the machine is running. Turn off
power and wait at least 5 minutes, then turn on the power to reboot.
6.2 Work main interface
Work interface shows the ultrasonic images, various parameters and the corresponding operation
menus, etc. Menus and parameters in various scanning modes are slightly different.
The main regional distribution map of work interface is as follows.
②
Menu
adjustment
region
⑥
Status prompt region
③
Image region
①
Title information region
④
Image
parameter
display
region
⑤
Measured
result
display
region
6.3 Title information region
It displays the company logo, hospital name, system date and time, patient information, MI/TI values,
acoustic power values, probe model, the current application mode and freeze icon, etc.
1. Company logo
The company logo is shown on the top left of screen.
2. Hospital name
Display hospital name. Hospital name can be edited and modified in the “System Preset/Basic”.
3. System date and time
Display the current system date and time. The adjustment of date and time, as well as the format of
date can be edited and modified in the “System Preset/Basic”.
4. Patient information
Display the patient’s name and ID. In the module of “New Patient”, input or edit the name and ID for
the current patient.
5. MI/TI value
Display the values of mechanical index (MI) and thermal index (TI) in the current system. According
to the different real-time scanning condition, it will display different index values.
6. Acoustic power value
Display the acoustic power in the current system. According to the different real-time scanning
condition, the acoustic power is different.
7. Probe model
Display the probe model using in the current system, switching the probe can be realized by pressing