JVC GY-HM790U, Инструкция по эксплуатации

Страница: 97 / 144

93
* Default values are indicated in bold characters.
Item Setting Values Function
Audio Monitor Stereo
Mix
For setting the audio sound of the [PHONES] terminal to stereo or mixed sound when the
[MONITOR SELECT] switch on the side of the camera recorder is set to
A
Both
B
.
Mix : Outputs mixed sound (outputs mixed sound of CH-1 and CH-2 to both L and R).
Stereo : Outputs stereo sound (outputs audio sound of CH-1 to L, and CH-2 to R). When a
monitor speaker is used, only the audio sound of CH-1 is output.
䡵
[PHONES] terminal, speaker, and RCA outputs according to the combination of the camera
recorder’s [MONITOR SELECT] switch settings and [Audio Monitor] settings
[MONITOR SELECT]
Setting
[Audio Monitor]
Setting
Output from [PHONES]
Terminal
Speaker
Output
RCA Output
L R CH1 CH2
[CH-1] ^ CH1 CH1
CH1 CH2
[BOTH] [Mix] CH1+CH2 CH1+CH2
[Stereo] CH1 CH2 CH1
[CH-2]
^
CH2 CH2
Others Menu
Item Setting Values Function
Alarm Level High
Middle
Low
Off
For selecting whether to turn on the alarm tone as well as setting the volume.
Alarm tone is output from the monitor speaker or [PHONES] terminal.
High
: Outputs alarm tone at a high volume level.
Middle : Outputs alarm tone at a medium volume level.
Low : Outputs alarm tone at a low volume level.
Off : Alarm tone is not output.
Genlock Input BNC
Adapter
For selecting a destination to input video synchronizing signal.
BNC
: [GENLOCK/AUX IN] terminal at the side of the camera recorder.
Adapter : Adapter connected to the accessory connection terminal (68 pin) at the back of
the camera recorder.
Note :
●
This item cannot be selected when the [GENLOCK/AUX] switch is set to
A
AUX
B
.
(U model)
Genlock Adjust...
^
For adjusting the H phase of the video signal of this camera recorder with respect to the
synchronizing signal input. (
A
Page 127)
Note :
●
This item cannot be selected when the [GENLOCK/AUX] switch is set to
A
AUX
B
.
(U model)
Return Input Adapter
Studio
For selecting a destination to input the return video.
Adapter
: Adapter connected to the accessory connection terminal (68 pin) at the back of
the camera recorder.
Studio : Adapter connected to the [STUDIO] terminal at the side of the camera recorder.
Note :
●
This item cannot be selected when the [GENLOCK/AUX] switch is set to
A
AUX
B
.
(U model)
Return Aspect 16:9
4: 3
For selecting the aspect ratio of the return video.
16:9
: Select this setting when the return video is a s q ueeze signal.
4: 3 : Select this setting when the return video is a 4: 3 aspect signal
(including Letter Box).
Note :
●
This item cannot be selected when the [GENLOCK/AUX] switch is set to
A
AUX
B
.
(U model)