JVC GY-HM790U, Инструкция по эксплуатации

Страница: 125 / 144

121
Memo :
●
If you do not want to save the file, select [Cancel] or press
the [CANCEL] button to return to the previous screen.
●
When saving of a file fails, a
A
Store Error!
B
message
(indicated in red frame) appears for several seconds, after
which the previous screen is displayed.
8
Saving is complete.
After saving of the file is complete,
A
Complete
B
appears on
the screen, and the menu screen closes automatically.
Loading a Setup File
1
Display the [Setup File Manage] menu.
Select the [Setup File Manage] menu on the [Main Menu]
screen, and press the Set button (
R ). ( A Page 97)
2
Select [Load File] and press the Set button ( R ).
3
Select [Scene File] or [Picture File], and press the Set
button ( R ).
The existing files are displayed.
4
Select the file to load using the cross-shaped
button (
JK
), and press the Set button (
R
).
Memo :
●
When the write-protect switch of the inserted SDHC card
is set, a
mark appears beside the SDHC card icon.
Setup files can be loaded from an SDHC card even if the
write-protect switch is set.
●
A mark is displayed at the right end when there are
some settings that are not supported by the setup file
(e.g., picture files saved using the GY-HM700 series).
These files can be loaded by this camera recorder, but
some of the settings will not be compatible. (
A Page 119)
●
Setup files that are completely incompatible will not be
displayed. ( A Page 119)
5
Select [Load] on the confirmation screen, and press
the Set button (
R
).
Loading starts, and
A
Loading...
B
appears on the screen.
Memo :
●
If you do not want to load the file, select [Cancel] or press
the [CANCEL] button to return to the previous screen.
●
When loading of a file fails, a
A
Load Error!
B
message
(indicated in red frame) appears for several seconds, after
which the previous screen is displayed.
6
Loading is complete.
After loading of the file is complete,
A
Complete
B
appears on
the screen, and the menu screen closes automatically.
Resetting Setup Files
1
Display the [Setup File Manage] menu.
Select the [Setup File Manage] menu on the [Main Menu]
screen, and press the Set button (
R
). (
A
Page 97)
2
Select [Reset File] and press the Set button (
R
).
3
Select [Scene File] or [Picture File], and press the Set
button (
R
).
The existing files are displayed.
4
Select the file to delete using the cross-shaped
button ( JK ), and press the Set button ( R ).
Memo :
●
Scene files and preset scene files stored inside the SDHC
card cannot be selected or reset.
5
Select [Reset] on the confirmation screen, and press
the Set button (
R
).
Deletion starts, and
A
Resetting...
B
appears on the screen.
Memo :
●
If you do not want to reset the file, select [Cancel] or press
the [CANCEL] button to return to the previous screen.
6
Resetting is complete.
After resetting of the file is complete,
A
Complete
B
appears on
the screen, and the menu screen closes automatically.
7
[Load File] Menu Screen
Cursor
5