JVC GY-HM790U, Инструкция по эксплуатации

Страница: 80 / 144

76
Menu Display and Detailed Settings
Rec Mode Menu
Clip Set Menu
* Default values are indicated in bold characters.
Record Set Menu
(continued)
Item Setting Values Function
Rec Mode
Normal
Pre Rec
Clip Continuous
Variable Frame
For selecting the record mode for recording to the SDHC card. ( A Page 58)
Memo :
●
[Variable Frame] is selectable when [Camera Resolution] is set to
A
1280x720
B
, and [Frame & Bit Rate] is set to
A
3 0p (HQ)
B
,
A
24p (HQ)
B
, or
A
25p (HQ)
B
.
Frame Rate For setting the recording [Frame Rate] when [Rec Mode] is set to
[Variable Frame].
Memo :
●
When [AE LEVEL] in the [Main Menu] B [Camera Function] B [Switch Set]
menu is set to
A
AE LEVEL/VFR
B
, you can use the cross-shaped button (
H I
)
to select the frame rate during Variable Frame Rec. In modes other than
Variable Frame Rec, the cross-shaped button (
H I
) functions as the [AE
LEVEL] setting button. ( A Page 80)
●
When [Frame Rate] is changed and the shutter speed becomes a value that is
invalid for the current [Frame Rate], the shutter speed is automatically
changed to match the current [Frame Rate].
When [Frame & Bit Rate] is
A
3 0p (HQ)
B
60, 48, 40,
3 0,
24, 20, 15, 12, 10
When [Frame & Bit Rate] is
A
24p (HQ)
B
60, 48, 40, 3 0,
24,
20, 15, 12, 10
When [Frame & Bit Rate] is
A
25p (HQ)
B
50, 40,
25,
20, 15, 12.5, 10
Pre Rec Time 5sec,
10sec, 20sec
For setting the pre-recording time when [Rec Mode] is set to
A
Pre Rec
B
.
Item Setting Values Function
Clip Name Prefix xxxG
(The default value of xxx
is the last three digits of
the serial number.)
For setting the first four characters of the name of the clip file to be recorded to
the SDHC card.
Enter any of the
3 8 characters including alphabets (upper case), numbers
(0 to 9), “_” (underscore), and “-” (hyphen) using the software keyboard.
(
A
Page 71 [Text Input with Software Keyboard])
Reset Clip Number ^ For assigning a new number to (Clip Number) by resetting it (0001). Select
[Reset] and press the Set button (
R
) to reset the number.
When other clips exist on the SDHC card, the smallest available number is
used after reset.
Example: If the [Clip Name Prefix] is
A
ABCD
B
, and
A
ABCD0001
B
already
exists on the SDHC card,
A
ABCD0002
B
will be assigned.