JVC GY-HM790U, Инструкция по эксплуатации

Страница: 115 / 144

111
Memo :
●
During enlarged display of the status on the LCD monitor screen, the video image remains displayed on the viewfinder.
Item Description
C
Time Code Generator Displays the operation mode of the time code. (Display: [FREE], [RECR], [REGN], [EXT], [EXT L]) ( A Page 48)
This item appears as
A
EXT
B
when [TCG Source] in the [TC/UB] menu is set to
A
External
B
.
L
indicates the synchronizing status of the built-in time code generator with respect to the time code that is
input to the [TC IN] terminal.
Lights up
: During synchronization with the external time code.
Light goes out : When the signal is not synchronized, or when there is no time code input.
D
Media Status Displays the SDHC card status in characters and symbols.
---- : No card found in the selected slot
STBY : Recording standby (recording pause)
REC : Recording
REVIEW : Clip Review ( A Page 56)
STBY
P
: Pre Rec recording standby (
A
Page 58)
REC
P
: Pre Rec recording ( A Page 58)
STBY
C
: Clip Continuous recording standby
( A Page 59)
REC
C
: Clip Continuous recording (
A
Page 59)
STBY
C
(displayed in yellow)
: Clip Continuous recording pause
( A Page 59)
STOP : Unable to record to the card in the slot
POFF : Power OFF
E
Remaining Space on
Media Displays the remaining recording time on the SDHC card. The currently active slot is indicated using an
enlarged card icon with black characters and a white background. A key mark appears when the write-protect
switch of the SDHC card is set.
F
OK Mark Appears as [OK] when the currently played clip is appended with an OK mark.
G
Video Format Displays the video format that is set. ( A Page 3 8)
Memo :
●
Displayed as
A
60i AUX
B
in the external input recording mode. (U model)
H
Voltage/
Battery Power Displays the current status of the power supply in use.
Display Description
Currently powered by an AC adapter. The current voltage is shown on the right.
If the supplied voltage from the AC adapter is low, the voltage value will be displayed in
red as a warning.
Currently powered by a battery.
When the battery power runs out, the battery mark appears hollow, and
A
RES
B
is displayed.
Memo :
●
The display on the right can be set using [Battery Info] of [Status Display] in the
[LCD/VF] menu. (
A
Page 91)
I
Operation of External
Device Displays the operating status of the connected external device.
For details, refer to the instruction manual of the corresponding external device.
J
Time Code (TC)/
User’s Bit (UB) Displays the time code (hour : minute : second : frame) or user’s bit data.
12. 3 V
12. 3 V
200min
3 0%
RES
0 0 : 0 0 : 0 0 : 0 0
Colon (:) for non-drop frames
Dot (.) for drop frames