22
To use this camera recorder, you can attach a battery pack or
connect an AC adapter to it.
(
Page 22 [Using a Battery Pack])
Page 22 [Using AC Power (DC IN Power)])
Note :
●
Set the [POWER] switch to
A
OFF
B
before changing the
power supply that operates this camera recorder.
Use an AC adapter (sold separately) to operate the camera
recorder with AC power.
1
Connect the DC cable of the AC adapter to the
[DC INPUT] terminal of the camera recorder.
Check that the power of the camera recorder and the AC
adapter is turned
A
OFF
B
and connect as shown in the
diagram.
2
Set the [POWER] switch of the camera recorder to
A
ON
B
after turning on the AC adapter.
Power will be supplied to the camera recorder.
Note :
●
Do not insert or remove the DC cable during recording.
●
Do not use power supply of high voltage fluctuation,
containing noise such as ripple, or with insufficient capacity.
䡵
Charging the Built-In Battery
The date/time and time code data are stored using the
built-in rechargeable battery.
When power is connected to the camera recorder, the
built-in battery always gets charged. When the power is
disconnected, the battery gradually discharges.
The battery will be totally discharged if left unused for
3
months and the date/time and time code data will be reset.
When this happens, set the [POWER] switch to
A
ON
B
to
display the [Initial Setting] screen, then set the date/time.
(
Page 26 [Setting the Clock (Initial Setting)])
Recommended Batteries
U model
: Dionic90 (Anton Bauer)
E model
: Endura-HL9 (IDX)
* Models with an E suffix are for the European market and
the UL Listing mark is not applicable.
Note :
●
Make use of the recommended batteries. Heavy batteries
may fall off if not used correctly.
●
See the battery instruction manual on how to charge the
battery.
Battery Operating Time
The following are the approximate times for continuous
operation on fully-charged batteries.
Memo :
●
Actual operating times may differ depending on the age of
the battery, charging condition, and operating environment.
●
Operating time is shortened in cold environment.
●
The operating time may shorten when power zoom is used,
accessories are connected, or when the LCD monitor is
fre
q
uently used.
Power Supply
Using AC Power
(DC IN Power)
DC Cable
AC Adapter
[DC INPUT]
DC OUTPUT
Using a Battery Pack
Battery
Continuous Operating Time
(At 25
f
)
Dionic90 (U model)
Approx. 2.75 h
Endura-HL9 (E model)
Approx. 2.75 h
Содержание GY-HM790U
Страница 5: ...V ...