JVC GY-HM790U, Инструкция по эксплуатации

Страница: 119 / 144

115
Checking the Preset Hue Area
1
Set the [ZEBRA ON/OFF] switch at the front of the
camera recorder to the [SKIN AREA/SPOT METER] end.
Doing so forcibly turns ON the Skin Adjust function
temporarily, and the preset hue area is displayed in color on
the LCD monitor and viewfinder.
Memo :
●
When [Color Gain] in the [Camera Process] menu is set to
A
Off
B
, only the area where Skin Detail is functioning is
displayed in skin tone. ( A Page 8 3 )
●
When [SKIN A./SPOT M.] of [Switch Set] in the
[Camera Function] menu screen is set to
A
Spot Meter
B
,
the hue area cannot be checked using the
[SKIN AREA/SPOT METER] switch. ( A Page 80)
Multi-format color bars can be output on this camera
recorder.
Setting
To output color bars, follow the setting procedure below.
1
Set the [FULL AUTO] switch to
A
OFF
B
.
2
Set [Bars] in the [Camera Function] menu to
A
On
B
.
(
A
Page 7 8 )
Color bars are output.
Color Bar Output Using the USER Buttons
1
Set the [FULL AUTO] switch to
A
OFF
B
.
2
Assign
A
Bars
B
to any one of the [USER1]/[USER2]/
[USER 3 ] buttons.
Set using [USER1]/[USER2]/[USER 3 ] of [Switch Set] in the
[Camera Function] menu. ( A Page 79)
3
Press the corresponding [USER1]/[USER2]/
[USER 3 ] button that is assigned with
A
Bars
B
.
Color bars are output.
Memo :
●
During color bar output, you can select whether to output
the reference audio signals using [Test Tone] in the
[Audio Set] menu. (
A
Page 77)
●
When the [FULL AUTO] switch is set to
A
ON
B
and [Bars]
in the [FULL AUTO] menu is set to
A
Off
B
, color bars are
not output in the AUX and Media modes.
[ZEBRA ON/OFF]
Switch
Color Bar Output
[FULL AUTO]
Switch
[USER1,USER2,USER 3 ]
Buttons