Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Справочник по командам

Страница: 900 / 1506

ip mobile secure foreign-agent
Syntax
ip mobile secure foreign-agent ipAddress spi spi key { hex hexKeyVal | ascii
asciiKeyVal } [ replay timestamp within seconds ] [ algorithm { hmac-md5 |
keyed-md5 } ]
no ip mobile secure foreign-agent ipAddress spi spi key { hex hexKeyVal |
ascii asciiKeyVal }
Release Information
Command introduced in JUNOSe Release 9.0.0.
Description
Configures the security associations for a foreign agent by specifying a security
parameter index (SPI) value and an authentication key. You can specify the interval
within which a registration request can exceed the home agent configured time value
by specifying the
replay timestamp within keyword. The no version deletes the
security associations for the specified foreign agent on the virtual router.
Options
■
ipAddress —IP address of the foreign agent
■
spi —Security parameter index (SPI) value, a specific 4-octet hexadecimal number,
in the range 0x100–0xFFFFFFFF, that authenticates inbound requests and permits
authentication for outbound registration requests
■
hexKeyVal —128-bit hexadecimal number, in the range 0x0–0xFFFFFFFE, that
specifies the authentication key for a specific security association
■
asciiKeyVal —128-bit alphanumeric value, up to a maximum of 16 characters,
that specifies the authentication key for a specific security association
■
seconds —Number of seconds, in the range 1–255, by which a registration request
can exceed the home agent configured time value; default value is 7 seconds
■
hmac-md5—Specifies the authentication algorithm for Mobile IP messages,
default value is hmac-md5
■
keyed-md5—Specifies the authentication algorithm for Mobile IP messages
Mode
Global Configuration
858 ■
ip mobile secure foreign-agent
JUNOSe 11.1.x Command Reference Guide A to M