Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Справочник по командам

Страница: 528 / 1506

debug ip ospf
Syntax
debug ip ospf ospfLog [ severity { severityValue | severityNumber } ]
[ verbosity verbosityLevel ]
no debug ip ospf ospfLog
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Shows information about the selected variable. The no version disables the display.
Options
ospfLog —OSPF log of interest; one of the following options:
■
■
adj—OSPF adjacency events
■
elect-dr—OSPF designated router election
■
events—OSPF general events
■
lsa—OSPF link-state advertisements events
■
neighbor—OSPF neighbor state machine
■
packets-rcvd—OSPF packets received
■
packets-sent—OSPF packets sent
■
route—OSPF route events
■
spf—All OSPF shortest path first calculation events
■
spf-ext—OSPF shortest path first external route calculation events
■
spf-inter—OSPF shortest path first interarea route calculation events
■
spf-intra—OSPF shortest path first intra-area route calculation events
■
severity—Specifies the minimum severity of the log messages displayed for the
selected category; described either by a descriptive term—
severityValue —or by
a corresponding number— severityNumber —in the range 0–7; the lower the
number, the higher the priority:
■
emergency or 0—System unusable
■
alert or 1—Immediate action needed
■
critical or 2—Critical condition exists
■
error or 3—Error condition
■
warning or 4—Warning condition
■
notice or 5—Normal but significant condition
486 ■
debug ip ospf
JUNOSe 11.1.x Command Reference Guide A to M