Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Справочник по командам

Страница: 532 / 1506

debug ip rip
Syntax
debug ip rip ripLog [ severity { severityValue | severityNumber } ]
[ verbosity verbosityLevel ]
no debug ip rip ripLog
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Shows information about the selected variable. The no version disables the display.
Options
ripLog— RIP log of interest; one of the following options:
■
■
events—General RIP events, such as removing RIP from an interface or
creating the RIP process
■
route—Events associated with two RIP routers exchanging routes
■
severity—Specifies the minimum severity of the log messages displayed for the
selected category; described either by a descriptive term—
severityValue —or by
a corresponding number— severityNumber —in the range 0–7; the lower the
number, the higher the priority:
■
emergency or 0—System unusable
■
alert or 1—Immediate action needed
■
critical or 2—Critical condition exists
■
error or 3—Error condition
■
warning or 4—Warning condition
■
notice or 5—Normal but significant condition
■
info or 6—Informational message
■
debug or 7—Debug message
■
verbosityLevel —Verbosity of the log category's messages; can be any of the
following:
■
low—Terse
■
medium—Moderate detail
■
high—Verbose
Mode
Privileged Exec
490 ■
debug ip rip
JUNOSe 11.1.x Command Reference Guide A to M