Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Справочник по командам

Страница: 639 / 1506

exceeded-action
Syntax
For IP and IPv6 rate-limit profiles:
[ no ] exceeded-action { drop | transmit | mark markVal }
For L2TP rate-limit profiles:
[ no ] exceeded-action { drop | transmit }
For MPLS rate-limit profiles:
[ no ] exceeded-action { drop | transmit | mark-exp expValue }
For hierarchical rate-limit profiles:
[ no ] exceeded-action { drop | transmit [ conditional | final ] }
Release Information
Command introduced before JUNOSe Release 7.1.0.
conditional and final keywords added in JUNOSe Release 7.2.0.
Description
Sets the action for packets not conforming to the committed rate and committed
burst size, and not conforming to the peak rate and peak burst size. The
no version
restores the default, drop.
Options
■
drop—Drops the packet
■
transmit—Transmits the packet; for hierarchical rate limits:
■
conditional—Packets must pass the next rate limit
■
final—Packets exit the hierarchy at rate limit
■
markVal —Marks value in the range 0–255; mark actions ar not supported on
hierarchical rate limits
■
expValue —EXP bit value in the range 0–7
Mode
Rate Limit Profile Configuration
Related Topics
■
Creating a Two-Rate Rate-Limit Profile
exceeded-action
■ 597
Chapter 6: E Commands