Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Справочник по командам

Страница: 698 / 1506

frame-relay policy
Syntax
frame-relay policy { input | output } policyName
[ statistics { enabled [ baseline { enabled | disabled } ] [ preserve | merge ] |
disabled [ merge ] } | merge ]
no frame-relay policy { input | output } [ policyName ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
merge keyword added in JUNOSe Release 7.2.0.
Description
Assigns a policy list to the ingress or egress of a Frame Relay interface. If you enter
this command when the policy list does not exist, the router will create a policy list
with a filter rule as the default. You must specify the
input or output keyword to
assign the policy list to the ingress or egress of the interface. The no version removes
the association between a policy list and an interface.
Options
■
input—Applies policy to data arriving at this interface
■
output—Applies policy to data leaving this interface
■
policyName —Name of the policy; a maximum of 40 characters
■
statistics—Enables or disable collection of policy routing statistics
■
enabled—Enables collection of policy routing statistics
■
baseline enabled—Enables baselining of policy routing statistics
■
baseline disabled—Disables baselining of policy routing statistics
■
preserve—Preserves existing statistics for any classifier-list that is the same
for both the new and old policy attachments when you attach a new policy
to an interface
■
disabled—Disables collection of policy routing statistics
■
merge—Enables merging of multiple policies to form a single policy
Mode
Interface Configuration
Related Topics
■
Setting a Statistics Baseline for Policies
656 ■
frame-relay policy
JUNOSe 11.1.x Command Reference Guide A to M