Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Справочник по командам, Страница: 1374 / 1506

monitor atm vp
Syntax
monitor atm vp atm interfaceSpecifier vpi [ atm interfaceSpecifier vpi ]*
[ load-interval seconds ] [ display-time-of-day ]
Release Information
Command introduced in JUNOSe Release 7.1.0.
Description
Displays bit rate and packet rate statistics over a specified time interval for one or
more ATM virtual paths (VPs). There is no
no version.
Options
■
interfaceSpecifier— ATM interface specifier; see Interface Types and Specifiers
on page 5
■
vpi —Virtual path identifier of the PVC. The numeric range of the VPI depends
on the line module capabilities and current configuration.
■
seconds —Number of seconds in the range 5–300 that specifies the time interval
at which the router calculates bit rates and packet rates for the specified VP;
default value is 5 seconds
■
display-time-of-day—Sets time at which the router calculates the bit rate and
packet rate statistics for the current interval
■
*—Indicates that one or more parameters can be repeated multiple times in a
list in the command line
Mode
Privileged Exec, User Exec
1332 ■
monitor atm vp
JUNOSe 11.1.x Command Reference Guide A to M