Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Справочник по командам

Страница: 796 / 1506

ip classifier-list
Syntax
ip classifier-list classifierName [ traffic-class trafficClassName ]
[ color { green | yellow | red } ] [ user-packet-class userPacketClassValue ]
[ source-route-class routeClassValue ] [destination-route-class routeClassValue ]
[ local { true | false } ] [ not ] { protocol }
[ not ] { sourceAddress sourceMask | host sourceHostAddress | any }
[ sourceQualifier ]
[ not ] { destinationAddress destinationMask | host destinationHostAddress | any }
[ destinationQualifier ] [ tcpQualifier ] [ ip-flags ipFlags ]
[ ip-frag-offset { eq 0 | eq 1 | gt 1 } ]
[ precedence
precNum | dsField dsFieldNum | tos tosNum ]
no ip classifier-list classifierName [ classifierNumber ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Creates or modifies a classifier control list. Use the not keyword to deny traffic for
a specific protocol, source address, or destination address. Use the any keyword to
allow traffic to any source or destination address. The no version removes the
classifier control list.
Options
■
classifierName —Name of the classifier control list entry
■
trafficClassName —Name of the traffic class to match
■
green—Matches packet color to green, indicating a low drop preference
■
yellow—Matches packet color to yellow, indicating a medium drop preference
■
red—Matches packet color to red, indicating a high drop preference
■
userPacketClassValue —User packet value to match; in the range 0–15
■
routeClassValue —Value of the route-class; in the range 0–255
■
local—Specifies traffic destined for this interface
■
true—Matches packets that are locally destined
■
false—Matches packets that are not locally destined
■
not—Matches any except the immediately following protocol or address
■
protocol —Protocol name (IGMP, IP, TCP, or UDP) or number (in the range 0–255)
to match
■
sourceAddress —Source address to match
■
sourceMask —Wild-card mask to apply to the source address
■
host—Matches source or destination address as a host
■
sourceHostAddress— Source host address to match
■
any—Matches any source or destination address
754 ■
ip classifier-list
JUNOSe 11.1.x Command Reference Guide A to M