Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Справочник по командам

Страница: 619 / 1506

equipment loopback
Syntax
equipment { customer | network } loopback
no equipment
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Enables or disables the router's ability to be placed in loopback by a remote device
connected on a CT3 or T3 interface. The
no version disables the router's ability to
be placed in loopback by the remote device.
Options
customer—Enables the router to enter into loopback when it receives an
appropriate signal from the remote interface
■
■
network—Disables the router's ability to enter into loopback when it receives
an appropriate signal from the remote interface
Mode
Controller Configuration
equipment loopback
■ 577
Chapter 6: E Commands