Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Справочник по командам

Страница: 777 / 1506

ip
Syntax
ip { permit | deny }
no ip
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Modifies the subscriber policy for IP to define whether the subscriber (client) interfaces
that belong to a bridge group or to a VPLS instance forward (permit) or filter (deny)
IP packets. The
no version restores the default value, permit IP packets.
You cannot change the default subscriber policy values for trunk (server) interfaces
that belong to a bridge group or to a VPLS instance. You also cannot change the
default subscriber policy values for a VPLS virtual core interface, which acts as a
trunk interface. The VPLS virtual core interface represents all of the MPLS tunnels
from the router to the remote VPLS edge (VE) devices.
Options
permit—Specifies that the subscriber interface associated with the bridge group
or VPLS instance forwards IP packets
■
■
deny—Specifies that the subscriber interface associated with the bridge group
or VPLS instance filters IP packets
Mode
Subscriber Policy Configuration
ip
■ 735
Chapter 10: I Commands