Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Справочник по командам

Страница: 514 / 1506

crc
Syntax
crc { 16 | 32 | none }
no crc
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Sets the size of the cyclic redundancy check. CRC is an error-checking technique that
uses a calculated numeric value to detect errors in transmitted data. 16 and 32
indicate the number of check digits per frame that are used to calculate the FCS.
Both the sender and receiver must use the same setting. The default value is 16. The
no version restores the value to the default.
Options
16—Specifies CRC-16, which transmits streams of 8-bit characters and generates
16-bit check bits per frame
■
■
32—Specifies CRC-32, which transmits longer streams at faster rates and
therefore provides better ongoing error detection
■
none—Disables CRC checking
Mode
Interface Configuration
472 ■
crc
JUNOSe 11.1.x Command Reference Guide A to M