Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Справочник по командам

Страница: 889 / 1506

ip local pool
Syntax
[ no ] ip local pool name [ startIpAddress [ endIpAddress ] ]
[ warning highUtilization abatedUtilization ] [ snmpTrap ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Specifies the pool name, the starting address, the ending address, group name, the
utilization threshold, and the SNMP trap flag. The
no version deletes a local pool.
Options
■
name— Text string in the range 1–16 characters that defines the name of the
local address pool
■
startIpAddress —Starting IP address in the local address pool
■
endIpAddress —Ending IP address in the local address pool
■
warning—Specifies one of the following utilization warnings:
■
highUtilization —High utilization value; a number in the range 1–100; default
value is 85
■
abatedUtilization —Abated utilization value; a number in the range 1–100;
default value is 75
■
snmpTrap—Enables SNMP pool utilization traps
Mode
Global Configuration
ip local pool
■ 847
Chapter 10: I Commands