Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Справочник по командам

Страница: 56 / 1506

Table 4: Interface Types and Specifiers for E120 Router and E320 Router (continued)
Example Interface Specifier Description Interface Type
atm 3/1/7.6 To configure an ATM interface or subinterface:
slot / adapter / port [. subinterface ]
■
slot —Number of the chassis slot in the
range 0–5 (E120 router) and 0–5 or
11–16 (E320 router)
■
adapter —Identifier for the IOA within the
chassis slot, either 0 or 1, where:
■
0 indicates that the IOA is installed
in the right IOA bay (E120 router)
or the upper IOA bay (E320 router).
■
1 indicates that the IOA is installed
in the left IOA bay (E120 router) or
the lower IOA bay (E320 router).
■
port —Port number on the IOA
■
subinterface —Number of the subinterface
in the range 1–2147483647
■
ATM interface
or
subinterface
atm 3/1/7/1/2 To display information about an ATM 1483
subinterface by using
show commands:
slot / adapter / port / vpi / vci
■
slot —Number of the chassis slot in the
range 0–5 (E120 router) and 0–5 or
11–16 (E320 router)
■
adapter —Identifier for the IOA within the
chassis slot, either 0 or 1, where:
■
0 indicates that the IOA is installed
in the right IOA bay (E120 router)
or the upper IOA bay (E320 router).
■
1 indicates that the IOA is installed
in the left IOA bay (E120 router) or
the lower IOA bay (E320 router).
■
port —Port number on the IOA
■
vpi —Virtual path identifier of the PVC on
this ATM 1483 subinterface; numeric
range for the E120 and E320 routers is
0–255
■
vci —Virtual circuit identifier of the PVC
on this ATM 1483 subinterface; numeric
range for the E120 and E320 routers is
1–65535
■
ATM 1483
subinterface
14 ■
Interface Types and Specifiers
JUNOSe 11.1.x Command Reference Guide A to M