Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Справочник по командам

Страница: 1346 / 1506

mdl string
Syntax
mdl string { eic eicValue | fic ficValue | lic licValue | unit unitValue | pfi pfiCode |
port portValue | generator genValue }
no mdl string { eic | fic | lic | unit | pfi | port | generator }
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Allows you to specify an MDL message on a T3 interface as defined in the ANSI
T1.107a-1990 specification. The
no version restores the default value to the specified
MDL message or to all MDL messages.
Options
■
eicValue— Equipment identification code; 1–10 characters; default value is the
null value.
■
ficValue— Frame identification code; 1–10 characters; default value is the null
value.
■
licValue— Line identification code; 1–11 characters; default value is the null value.
■
unitValue— Unit identification code; 1–6 characters; default value is the null value.
■
pfiCode— Facility identification code to send in the MDL path message; 1–38
characters; default value is the null value.
■
portValue— Equipment port number to send in the MDL idle signal message;
1–38 characters; default value is the null value.
■
genValue —Generator number to send in the MDL test signal message; 1–38
characters; default value is the null value.
Mode
Controller Configuration
1304 ■
mdl string
JUNOSe 11.1.x Command Reference Guide A to M