Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Справочник по командам

Страница: 1222 / 1506

l2tp policy
Syntax
l2tp policy { input | output } policyName [ statistics
{ enabled | disabled } [ merge ]
no l2tp policy { input | output }
Release Information
Command introduced before JUNOSe Release 7.1.0.
merge keyword added in JUNOSe Release 7.2.0.
Description
Assigns an L2TP policy list to a profile, which then assigns the policy to an interface.
If you enter the
l2tp policy command and the policy list does not exist, the router
creates a policy list with no rules, the default. Attaching this policy list to an interface
filters all packets on that interface. You must specify the
input or output keyword
to assign the policy list to the ingress or egress of the interface. The no version
removes the association between a policy list and a profile.
Options
■
input—Applies policy to data arriving at the interface
■
output—Applies policy to data leaving the interface
■
policyName —Name of the policy; maximum of 40 characters
■
statistics—Enables or disables collection of policy routing statistics
■
enabled—Enables collection of policy routing statistics
■
disabled—Disables collection of policy routing statistics
■
merge—Enables merging of multiple policies to form a single policy
Mode
Profile Configuration
Related Topics
■
Setting a Statistics Baseline for Policies
1180 ■
l2tp policy
JUNOSe 11.1.x Command Reference Guide A to M