Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Справочник по командам

Страница: 1338 / 1506

maximum routes
Syntax
maximum routes limit { warningThreshold | warning-only }
no maximum routes
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Sets a warning threshold and maximum limit for routes imported by a PE router into
a VRF from associated CE routers. The
no version removes the limit and warning
threshold.
Options
limit— Number in the range 1–4294967295 that when exceeded prevents routes
from being imported into the routing table; when first exceeded generates a
■
limit-exceeded log entry; if the route count fluctuates below and up to this value,
an interval of five minutes must pass before another limit-exceeded log entry
can be generated
■
warningThreshold— Percentage in the range 1–100 that when first exceeded
generates a warning-threshold-exceeded log entry; if the route count fluctuates
around this value, an interval of five minutes must pass before another
warning-threshold-exceeded log entry can be generated
■
warning-only—Causes the limit to function as a warningThreshold ; specifies that
exceeding the limit generates a warning-threshold-exceeded log entry instead
of a limit-exceeded log entry and permits routes exceeding the limit to be added
to the routing table; if the route count fluctuates around the limit , an interval of
five minutes must pass before another warning-threshold-exceeded log entry
can be generated
Mode
VRF Configuration
1296 ■
maximum routes
JUNOSe 11.1.x Command Reference Guide A to M