Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010, Справочник по командам

Страница: 382 / 1506

bulkstats schema subtree
Syntax
bulkstats schema schemaIndex subtree
{ if-stack | if-stats { subtreelist [ ifstatsList [ ifstatsList ]* ] |
if-create-delete-time-stats interfaceType interfaceType } | igmp | system }
bulkstats schema schemaIndex subtree
{ if-stack | if-stats | igmp [ subtreelist igmpList [ igmpList ]* ] | system }
no bulkstats schema schemaIndex
Release Information
Command introduced before JUNOSe Release 7.1.0.
mplsL2shim , mplsMajor , and mplsMinor keywords added in JUNOSe Release 8.2.0.
Description
Configures the schema for collecting if-stack, if-stats, or router data. The no version
removes the schema.
Options
■
schemaIndex— Identifier for the schema in the range 1–65535
■
if-stack—Retrieves ifStackTable
■
if-stats—Retrieves ifTable/ifXTable counters
■
ifstatsList —Type of statistics and time-offset keyword, which includes the offset
from the master interval at which the record was collected in each bulkstats
interface record
■
if-create-delete-time-stats—Retrieves interface final statistics (interface statistics
that may be lost during higher create or delete frequency)
■
interfaceType —One of the following interface types for which you can collect
statistics: ATM 1483, IP, MPLS minor, MPLS major, MPLS shim, PPP
■
igmp—Retrieves IGMP statistics
■
igmpList —Type of statistics and time-offset keyword, which includes the offset
from the master interval at which the record was collected in each bulkstats
interface record
■
system—Retrieves sysUpTime and nvsUtilPct global statistics; retrieves slotDescr,
the cpuUtilPct, and memUtilPct per-slot statistics
■
*—Indicates that one or more parameters can be repeated multiple times in a
list in the command line
Mode
Global Configuration
340 ■
bulkstats schema subtree
JUNOSe 11.1.x Command Reference Guide A to M