A80, A80t, W80, W80t Operating Manual
28.08.2019
39
6.2.1.
Analog module
Order No.: 8900105
7a
7b
The analog module has two circular female connectors.
7a
Female connector
STAND-BY
input (can be used for an
external "on/off" switch).
7b
Female connector
REG+E-PROG
with three analog
datalogger outputs, and one input for an external programmer
or other voltage and/or current sources.
Information regarding labeling:
test
For service purposes only. This button has no function during
regular operation.
reset
The module can be „reset“ with this key. This may be necessary
in case of an error, for example if the red LED (error) lights up.
on
If the Green LED is blinking
Blinking indicates that the module is receiving information (CAN-
Messages) and is working correctly.
If the Green LED is illuminated
The module is powered on, but is not receiving any information
(CAN-Messages).
If the Green LED is not illuminated
The unit is turned off, or the module is damaged, or the power
supply to the module is not working.
error
If the Red LED is not illuminated
If the unit is operating and this LED is not illuminated, the
module is working properly.
If the Red LED blinks
An unknown error has occurred while this module was
communicating on the CAN-Bus. The CAN-Bus has deactivated
itself for safety reasons. Turn the unit off via the power switch,
wait a few seconds, and turn it back on again. If the error occurs
again, please contact
If the Red LED is illuminated
A fault has occurred with the module. The TFT display will show
the type of error (Alarm code) and troubleshooting steps, if
applicable.
6.2.2.
Module with Pt100 connector
Order No.: 8900106
The module with a Pt100 connector is intended for the connection of a
second Pt100 external sensor. The sensor is connected at the back of
the JULABO temperature control system. It will measure a second
temperature at any point in an application. The value (external 2) can be
displayed on the user interface. For setup use the path > Menu
Customize Home display <. For description see the operating manual
“User Interface”, 1.953.3041 of the JULABO temperature control system.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
