Preparations
24
28.08.2019
5.2.
Bath fluids
Observe the safety data sheet of the bath fluid, especially the fire
point!
The unit must be supervised at all times if using a bath fluid with a fire
point of
≤
65 °C [
≤
149 °F].
When device leaks, leaky hose connections or defective
temperature control tubing, it must be provided to absorb the bath
fluid with a suitable binder according to safety data sheet.
Recommended JULABO bath fluids for closed, external systems
Order No.
Description
Working temperature range
8940140
THERMAL HL60
10 l
-60…+250 °C
8940141
THERMAL HL60
5 l
Use of non-recommended bath fluids may result in a fire hazard or
other hazard:
JULABO will
assume
no liability for damages resulting from use of an
unsuitable bath liquid.
Unsuitable bath liquids include
substances with the following
characteristics:
•
highly viscous
(significantly higher than 50 cSt (50 mm
2
/s) at the relevant working
temperature)
•
low viscosity, but with creep properties
•
corrosive properties
•
liquids that tend to crack.
JULABO assumes no liability if unsuitable liquids are used!
Maximum viscosity must not exceed 50 cSt (50 mm
2
/s) at working
temperature.
Use of purified or unpurified water is not permitted.
Examples:
tap water, distilled water, deionized water, water/glycol mixtures, CaCl
2
solutions
www.
GlobalTestSupply
.com
Find Quality Products Online at:
