Cleaning the unit
56
28.08.2019
10.4. Removing residual cleaning liquid:
•
Switch on the unit at the mains switch!
This will keep the ventilation valve open.
•
Blow dry, warm air through the temperature control system.
Direct the air through the temperature control system's various
connections.
•
Start with the connections (4, 5) that lead to the internal reservoir.
Then proceed to the cooling water connections that lead to the heat
exchanger, and finally the drain port on the front side.
•
After the residual moisture has evaporated, reattach or seal the
connections as appropriate for the next use of the temperature
control system.
•
Close the drain screw on the front side, using a screw driver.
10.5.
Shut
-down and storage
If a unit will not be operated, the temperature control system should be
cleaned as described and stored in a dry, dust-free and frost-free
environment.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
