Operator Responsibilities - General Safety Notices
8
28.08.2019
2.
Operator Responsibilities - General Safety Notices
Products from JULABO GmbH are safe when installed, operated, and
maintained according to generally accepted rules of safety. This chapter
explains the potential hazards that can arise in conjunction with operation
of the temperature control system and describes safety measures for
eliminating these hazards when possible.
2.1.
Personnel
•
The owner/operator is responsible for the qualifications of the
operating personnel.
•
Make sure that anyone who will operate the temperature control
system has been instructed regarding the relevant tasks.
•
The operators must be trained on a regular basis on the hazards that
may occur during their activities and on measures for mitigating
these hazards.
•
Make sure that anyone entrusted with operation, maintenance, and
installation has read and understood the safety information and the
operating manual.
•
When using hazardous materials or materials that may become
hazardous, allow only persons with complete knowledge of the
materials and the circulator to bring the unit into operation. These
persons must have the ability to evaluate potential dangers in their
entirety.
2.2.
Handling guidelines
•
Avoid impacts to the housing, vibrations, damage to the keypad
(keys, display), or heavy soiling.
•
Regularly check, at least once every two years, to ensure proper
condition of the safety, warning, and prohibition symbols.
•
Ensure that the mains power network exhibits low impedance in
order to avoid influencing units that are operated on the same
network.
•
Magnetic radiation may affect other devices that contain components
that are sensitive to magnetic fields, such as a monitor. We advise
maintaining a min. distance of 1 m from such devices.
•
The ambient temperature may not exceed 40 °C [104 °F], nor fall
below 5 °C [41 °F].
•
Rel. humidity should not exceed 50% at 40 °C, [104 °F].
•
Do not store or use the unit in aggressive (corrosive) atmospheres.
Protect the unit from contamination.
•
Do not place the device in direct sunlight.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
