A80, A80t, W80, W80t Operating Manual
28.08.2019
19
4.1.2.
Drain elements on the front side of the device (lower section)
The drain nozzle (7) with
outer diameter
∅
12 mm and
the drain screw (8) are
located near the bottom of
the unit behind the
ventilation grid.
On the W80 it is possible to
completely drain the cooling
water system via the sealing
plug M10x1 (9).
Details are given in
chapter
A80
W80
Replace the ventilation grid
(front panel) as follows:
•
Slide the venting grid
below the upper unit
cover. Set the
ventilation grid onto the
angled metal piece at
the bottom of the unit.
•
Tilt the ventilation grid
towards the unit until it
touches the mounting
pins.
•
Lift the grid slightly and
onto the mounting pins.
•
Slide the ventilation grid
downward.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
