JRC JAN-701B - Скачать руководство пользователя страница 92

Страница: 92 / 564

3 Basic Operation of ECDIS

3-30

3.3.7 How to Release the Alarm ([ALARM ACK])

When the alarm occurs, the buzzer sounds and the alarm contents are displayed in the alarm display

area on the display panel to notify the operator of an alarm. When more than one alarm occurs, it changes

an alarm display every second.

After confirming the contents of the alarm, press the [ALARM ACK] key on the operation panel or

left-click the alarm acknowledge-button on the display panel to acknowledge the alarm. When confirming

an alarm, the buzzer sound stops and the alarm display disappears from the alarm acknowledge-button.

However, until the cause of the alarm is removed, in the alarm display area, the alarm maintains a

displayed condition.

[Alarm List] button displays the alarm record which occurred recently. When you want to see the alarm

which occurred in the past, it chooses "Logbook" from the menu. (See 3.26 “Logbook”)

Memo: For alarm settings, see 7.10 “Setting the Alarm Options”.

(1) When no alarm is found

If no alarm is found, the alarm display area displays [No Alarm].

(2) When an alarm occurs

An alarm is displayed at the alarm acknowledge-button and in the alarm display area and the alarm

sound sounds.

Nothing is displayed here.

The alarm acknowledge-button

The alarm display area

[Alarm List]
botton

Displaying [No Alarm]

Displaying the alarm

Displaying the alarm
Blinking every 0.5 seconds

Содержание JAN-701B -





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание JAN-701B -

Отзывы:

JRC JAN-701B -, Инструкция по эксплуатации, Страница: 92 / 564

Результаты поиска

Содержание JAN-701B -

Отзывы: