JRC JAN-701B - Скачать руководство пользователя страница 148 | Manualshive

Страница: 148 / 564

JRC JAN-701B - Скачать руководство пользователя страница 148

3 Basic Operation of ECDIS

3-86

3.11.1 Multi View Screen

You can display two screens, View 1 and View 2 simultaneously.    The selected screen has active title
bar as shown in the above figure. The other side screen is inactive.
To change a screen actively, it left-clicks the screen to want to choose.    At this time, off-center will be
used to place the cursor in the center of the screen for that view.    If off-center is not desired, move the
cursor to the title bar of the view, then left-click.

1) In the normal menu

Select [MENU] - [(6) Chart] - [(1) Multiview] in that order.

2) Left-click one of the submenus to select the multi view type.

Then, the selected multi view is displayed.
- Single View

･

When displaying Multi Window, the screen will return to the normal screen (single view).

- Top Bottom

･

Chart is displayed dividing top and bottom.

･

View1 is displayed in upper end title bar of chart and View2 is displayed in lower end title

bar.

- Right Left

･

Chart is displayed dividing right and left.

･

View1 is displayed in right end title bar of chart and View2 is displayed in left end title

bar.

- Right Top View

･

View2 is displayed in the upper right of View1.

･

View1 title bar is displayed in lower end of View1 and View2 title bar is displayed in

upper end of View2.

- Left Top View

･

View2 is displayed in the upper left of View1.

･

View1 title bar is displayed in lower end of View1 and View2 title bar is displayed in

upper end of View2.

- Right Bottom View

･

View2 is displayed in the lower right of View1.

･

View1 title bar is displayed in upper end of View1 and View2 title bar is displayed in

lower end of View2.

- Left Bottom View

･

View2 is displayed in the lower left of View1.

･

View1 title bar is displayed in upper end of View1 and View2 title bar is displayed in

lower end of View2.

- Select Area

･

A selected area will be displayed as view 2.

(Refer to

3.11.2 Selecting an Area

for more information)

- Wide Range View

･

[Wide Range View] is displayed in the display panel.

(Refer to

3.11.3 Wide Range View Screen

for more information)

«
...
146
147
148
149
150
...
»

Содержание JAN-701B -





















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов