JRC JAN-701B - Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 564

JRC JAN-701B - Скачать руководство пользователя страница 50

2 Names and Functions

2-12

2.2.1.3 Auto Sailing Status

The auto sailing status panel will be displayed as follows:

2.2.1.4 The setting of the route

The setting of a route and the display of the WPT information

Next waypoint being selected
(Drop-down list shows the selectable waypoints manually.)
When starting Auto Sail, the combo box can not be selected

from except WPT which is heading at current.

Bearing and Distance from the ship to the “To WPT”

Route name being selected (“UNLOAD” appears if nothing is selected.
Drop-down list shows all route names.)

When clicking Route combo box, a drop down list of route files is displayed.

First line: File name
Second line: Comment of route file

Note:

•To use auto sailing feature, the Auto Pilot equipment must be connected.

Displays the autopilot steering mode.
See the autopilot instruction manual for descriptions of the various steering modes.

BLANK: Not Auto Sailing
KEEP: Keep tracking the current leg
DIRECT: Direct route to Waypoint
TURN: Changing the steering
AVOID: Under ship-avoiding operation

BLANK: Not Auto Sailing

MAN: Manual turning mode

AUTO: Auto turning mode

NotRDY: Not ready to Auto Sailing

(The route has not been loaded, or a POS1, Gyro, Log, or A/P alarm has occurred.)

READY: Ready to Auto Sailing

CONV: Conventional (Normal) type Auto Sailing

TCS: TCS type Auto Sailing

«
...
48
49
50
51
52
...
»

Содержание JAN-701B -





















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов