JRC JAN-701B -, Инструкция по эксплуатации, Страница: 287 / 564

4 Route Planning 4-25
ECDIS
How to edit in the Table Editing Menu -- Continued:
[Editing the Course and Distance in the “WPT to WPT” display mode]
In the Table Editing mode, left-click the following drop-down list button and select
[WPT to WPT]. You can edit the values of CRS (Course to the next WPT) and
DIST (Distance to the next WPT) columns.
Example:
In the following example, the Cse and Dist for the W001 are modified. As a
result, the position of the W002 changes according to this modification. Since the
position of the W002 changes, the Cse and Dist values of W002 for W003 also
change.
[Editing the ETA in the “Total” display mode]
In the Table Editing mode, left-click the following drop-down list button and select
[Total]. You can edit the value of ETA (Estimated time of arrival to the WPT from
W000) column.
When you edit the WPTn’s ETA, the ETA and ETD of W000 to WPTn-1 are
calculated based on the WPTn’s ETA, and the calculated ETA values are
displayed in the table.
W002 (After modification)
W002 (Before modification)
W003
W001