JRC JAN-701B -, Инструкция по эксплуатации, Страница: 112 / 564

3 Basic Operation of ECDIS 3-50
3.3.9.5 Display Received Message
It displays the message which was sent from AIS.
Addressed Message (Displays the sent message from AIS to the own ship)
Select [MENU]-[(1)AIS/TT]-[(1)Message]-[(1)Addressed Messages] in that order.
Broadcast Message (Displays the message which was sent without specifying an address from AIS)
Select [MENU]-[(1)AIS/TT]-[(1)Message]-[(2)Broadcast Messages] in that order.
3.3.9.6 AIS sentence
The sentence form that receives AIS is selected. Please confirm the specification of the AIS
device of the ship, and select an appropriate sentence.
Select [MENU]-[(1)AIS/TT]-[(0) AIS Message] and the following sentences in that order.
(1)VDM
(2)TTD1
(3)TTD2
3.3.9.7 Activating and Deactivating AIS Targets
The default for AIS targets is display in the inactive state. The procedures below are used for
activating and deactivating AIS targets.
Activating:
1) Or right-click on the chart, then select [Activate AIS] from the context menu.
The cross cursor will change to a box cursor.
2) Move the cursor with the track ball to an AIS target that is not active, then left-click on it. The
AIS target will become active, the status will be changed to active, and the vector will be
displayed.
When the cursor move the target, MMSI (the ship’s name) and CPA/TCPA are displayed.
Deactivating:
1) Or right-click on the chart, then select [Deactivate AIS] from the shortcut menu.
The cross cursor will change to a box cursor.
2) Move the cursor with the track ball to an AIS target that is active, then left-click on it. The AIS
target will become inactive, and the vector will not be displayed.