JRC JAN-701B - Скачать руководство пользователя страница 514

Страница: 514 / 564

10 Maintenance and Inspection

10-14

10.5.5 CD Cleaner

This function is DVD drive can be cleaned with an attached Cleaning CD.

Note:

• We recommend cleaning DVD Drive every month at least, otherwise system might be unable to

read Chart CD correctly, and fail to import/Update charts.

●

How to Cleaning the DVD Drive

1) Cleaning CD is set in the DVD Drive.
2) Left-click [CD Cleaner] in User Maintenance menu.

When be displayed the following message, try to set Cleaning CD.

3) The following message is displayed, and the cleaning starts.

The cleaning stops when the message is close.

4) Left-click the [OK] to close the message and stop cleaning.

Содержание JAN-701B -





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание JAN-701B -

Отзывы:

JRC JAN-701B -, Инструкция по эксплуатации, Страница: 514 / 564

Результаты поиска

Содержание JAN-701B -

Отзывы: