JRC JAN-701B - Скачать руководство пользователя страница 233

Страница: 233 / 564

3 Basic Operation of ECDIS

3-171

ECDIS

a) Type (Type of chart)

• S-57:

S-57 chart is displayed. “C-MAP Ed.2” can be selected for simultaneous
display.

• C-MAP Ed.2: C-MAP Ed.2 chart is displayed. “S-57” can be selected for simultaneous

display.

• C-MAP Ed.3: C-MAP Ed.3 chart is displayed.
• ARCS:

ARCS chart is displayed.

Note:

• ARCS can be selected only if the ARCS chart has already been installed and the [ARCS

PIN] is correctly inputted when the "Navigation & Planning" is started.

• ARCS and other S-57 or C-MAP cannot be selected at the same time.

b) Text Size (S-57/C-MAP only)

The character size in the text to which the

mark is attached can be changed.

Example: Land region

Expands characters.

Reduces characters.

Small Large

Small

Smalld

Large

Small

Large

Small

Large

Small

Содержание JAN-701B -





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание JAN-701B -

Отзывы:

JRC JAN-701B -, Инструкция по эксплуатации, Страница: 233 / 564

Результаты поиска

Содержание JAN-701B -

Отзывы: