JRC JAN-701B -, Инструкция по эксплуатации, Страница: 259 / 564

3 Basic Operation of ECDIS 3-197
ECDIS
3.35.2 Shifting by Entering the Position
1) In the normal menu
Select [MENU] - [(4) Ownship/Track] - [(1) Adjust] - [(2) Enter Position] in that order.
The “Enter Position” panel opens.
2) Enter the position and left-click the [OK] .
3) The "Location/Attributes-Reference Point" panel is displayed.
4) Own ship will shift to that position.
5) It does not off center when clicking [Cancel] .
To clear the offset:
In the normal menu
Select [MENU] - [(4) Ownship/Track] - [(1) Adjust] - [(4) Clear Offset] in that order.
3.35.3 Shifting by Entering the Offset Value
1) In the normal menu
Select [MENU] - [(4) Ownship/Track] - [(1) Adjust] - [(3) Enter Offset] in that order.
The “Enter Offset” panel opens.
2) Enter the amount of offset to be shift and left-click the [OK] .
3) The "Location/Attributes-Reference Point" panel is displayed.
4) Own ship will shift by the amount of offset entered.
5) It does not off center when clicking [Cancel].
3.35.4 Canceling the Ship Offset
In the normal menu
Select [MENU] - [(4) Ownship/Track] - [(1) Adjust] - [(4) Clear Offset] in that order.
The offset applied to own ship can be canceled. As the offset is canceled, the color of the position
display on the panel changes from sky blue to gray.