manualshive.com logo in svg

JRC JAN-701B -, Инструкция по эксплуатации, Страница: 366 / 564

Поделиться
Скачать
JRC JAN-701B - Скачать руководство пользователя страница 366

 

5  Chart Editing 

5-40

 

5.5.3 Hiding Objects (Only during the Manual 

Update Operation) 

Objects that have been saved in Manual Update mode cannot be edited, but it is possible to hide them 
from the chart.    This function is available only in Manual Update mode. 
 

(1)  Hiding objects 

1)  In the normal menu 

Select [MENU] - [(6) Chart] - [(8) Manual Update] in that order. 

And start Manual Update mode (if you are editing objects in Manual Update mode, first exit the 
mode and then restart it). 

2)  In the User Chart Editing menu 

Select [MENU] - [(2) Edit] - [(2) Hide Object] in that order.. 

3)  Select an object you wish to hide by left-clicking on it.In the User Chart Editing menu 

Select [MENU] - [(2) Edit] - [(2) Hide Object] in that order. 

The selected object disappears from the chart. 

4)  Repeat the same procedure to hide objects one by one. 

 

(2)   Restoring hidden objects 

1)  In the normal menu 

Select [MENU] - [(6) Chart] - [(8) Manual Update] in that order. 

And start Manual Update mode (if you are editing objects in Manual Update mode, first exit the 
mode and then restart it). 

2)  In the User Chart Editing Menu 

Select [MENU] - [(2) Edit] - [(2) Hide All] in that order. 

Manually updated objects are all hidden for five seconds, and then they will be displayed again.   
The objects that were hidden by the method in 5.5.3-(1) are not displayed. 
 

(3)   Re-hide Restored hidden objects 

1)  In the normal menu 

Select [MENU] - [(6) Chart] - [(8) Manual Update] in that order. 

And start Manual Update mode (if you are editing objects in Manual Update mode, first exit the 
mode and then restart it). 

2)  In the User Chart Editing Menu 

Select [MENU] - [(2) Edit] - [(3) Reset Hide] in that order. 

Hidden objects are all displayed collectively for five seconds, and then they will be hidden again. 

 
 

Note: 

  The object which operated "Hiding Object" maintains a hiding condition to 90 days. 

When passing more than 91 days, an object is deleted. 

 

 
 
 
 

Содержание JAN-701B -





















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов