JRC JAN-701B -, Инструкция по эксплуатации, Страница: 398 / 564

7 Tools and Setting/Serviceman Menu 7-20
7.15 Own ship’s Parameter Setting
Input the parameter accurately according to the specification of the ship.
Otherwise, accidents may result.
After changing the setting, execute to exit “Navigation & Planning”.
Otherwise, accidents may result because ECDIS is not affected by the set
parameter.
7.15.1 Ship’s Parameter
This function sets the parameter of a ship necessary for operating ECDIS.
1) In the normal menu
After “Serviceman” menu is displayed by “Code Input” panel,
Select [(1) Serviceman]-[(4) Ship’s Parameter] in that order.
The [Ship’s Parameter] dialog box will be displayed.
2) Input an accurate value to each parameter column.
3) After inputting all the parameter, push the OK button. Then, Information message is displayed.
4) Exit to “Navigation & Planning” and start again
.