JRC JAN-701B -, Инструкция по эксплуатации, Страница: 373 / 564

6 Automatic Sailing 6-7
ECDIS
6.3
Automatic Sailing Operation
The following shows the outline of the operation of ECDIS and autopilot during automatic sailing.
ECDIS Autopilot
1) Select the [Route], and [Start] automatic
sailing.
(See the descriptions below for the
details of this procedure.)
3) Monitor the route.
5) Select [UNLOAD] for [Route] to clear the
route from the screen.
2) Set the mode of the autopilot to “NAVI” for
the autopilot made by YOKOGAWA.
(Set it to “RC” for the autopilot made by
TOKIMEC.)
4) After ending voyage, change the mode of
the autopilot from the “NAVI” to “HAND”.
If the own ship has arrived at the boundary of a WPT during automatic
sailing, be sure to check the safety and perform turning manually (press the
[TURN] key.).
Otherwise, the ship keeps the course with the leg bearing, and accidents
may result.
During sailing, be sure to check own ship’s position and bearing as often as
necessary, regardless of whether the automatic sailing is in operation or
not.
Otherwise, accidents may result.
Note:
• For operation of the autopilot, see its instruction manual.