manualshive.com logo in svg

JRC JAN-701B -, Инструкция по эксплуатации, Страница: 520 / 564

Поделиться
Скачать
JRC JAN-701B - Скачать руководство пользователя страница 520

 

10  Maintenance and Inspection 

10-20

 
Trouble –continued-- 

Symptom Cause  Remedy 

Error code (0XFFFFFFA) is 
displayed in Chart Portfolio. 

Wrong authorization code was 
input. 

Input the proper authorization 
code you obtained again. 

Error code (0xFFFFFF73) is 
displayed while ARCS chart is 
imported in Chart Portfolio. 

Reading from CD-ROM was 
faulty. 

Clean the CD-ROM, and 
perform the import procedure 
again. If the error persists, the 
CD-ROM or CD-ROM drive may 
be out of order.   
Contact the distributor of the 
chart to request for replacement 
of CD-ROM, or contact the JRC 
sales representative to request 
repair of the CD-ROM drive. 

When the [ 

  ] (Navigation & 

Planning) button is left-clicked 
in the startup menu, the 
message “ECDIS License 
Invalid” is displayed. 

Dongle (key lock device) is 
broken or the information of 
Dongle and Software are not 
matched. 

Call the JRC sales 
representative for repair. 

ARCS chart is not displayed. 

Chart is imported when the term 
of validity of ARCS has expired.

 

Chart Permit was registered 
when the term of validity of 
ARCS has expired. 

Register the latest Chart Permit 
within the expiration date, and 
then import ARCS chart. 

 

PIN input was canceled when 
Navigation & Planning was 
started. 

Input PIN when starting 
Navigation & Planning, and 
select ARCS chart. ([Menu] - 
[Chart] - [Option] - [S57/C-MAP/ 
ARCS]) 

Chart Permit type was changed 
from trial version to regular 
contract. 

ARCS chart will not be 
displayed, though it has been 
displayed normally by that time. 

Details of contract were 
changed. 

Contact the retailer from whom 
ARCS was purchased to check 
the details of the contract. 

Alarm occurs frequently while 
ARCS chart is displayed. 

ECDIS has detected the alarm 
information regarding ARCS 
chart itself and displayed the 
alarm. 

Check the details of the alarm. 
See 10.2.1 “Alarm Information of 
ARCS Chart”. 

Error message 
“????Earcs.dll????” is 
displayed when Navigation & 
Planning is started. 

Index was not generated in 
Chart Portfolio for such reasons 
as forced termination of this 
equipment during ARCS Index 
generation. 

Re-generate Index in Chart 
Portfolio. ([Chart] - [ARCS] - 
[Regenerate Index]) 

 

Содержание JAN-701B -





















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов