manualshive.com logo in svg

JRC JAN-701B -, Инструкция по эксплуатации, Страница: 201 / 564

Поделиться
Скачать
JRC JAN-701B - Скачать руководство пользователя страница 201

 

3    Basic Operation of ECDIS 

3-139

ECDIS 

 

‹

  To the close the analong mater panel: 

  In the normal menu   

Select [MENU] - [(7) Main] - [(8)Multi Window]-[(2)Analog meter] in that order. 

Then, the “Display Panel Setting” panel is closed. 
 

Changing the items to be displayed on the “analog meter panel”: 
1)  In the normal menu 

Select [MENU] - [(7) Main] - [(0) Setting] - [(7) Display Panel Setting] in that order. 

Then, the “Display Panel Setting” panel opens. 

2)  Left-click to turn ON/OFF the items you want to display and left-click the [OK] button. It reflects 

setting and it closes a panel. 
It cancels setting and it closes a panel when clicking [Cancel] button. 
 

 

 
 
 

3.24.2  Other Multi Window display 

The window of the following contents can be displayed at the thing except the analog meter.

 

Because the contents which can be displayed by the establishment environment are different, for the 
details, refer to the instruction manual of each of the facilities. 

 

1)  To open multi window 

In the normal menu 

Select [MENU] - [(7) Main] - [(8) Multi Window] and select to want to display more than the 
menu, the supporting menu has a check mark and the panel is displayed. 

COG is displayed at the “Ana log meter” panel when making valid. 

CTS label, CTS value are displayed in the display panel when making valid. 

Depth label, Depth sensor name, Depth value are displayed in the display 

panel when making valid. 

HDG is displayed at the “Analog meter panel” when making valid. 

Set / Drift is displayed at the “Analog meter” panel when making valid. 

CTS is displayed at the “Analog meter” panel when making valid.   

Triangle is displayed in the left side of each of HDG, COG, Set, CTS of the 

display panel. 

Содержание JAN-701B -





















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов