Janssen F Series, Руководство по эксплуатации

Страница: 79 / 315

77
9.14 Installation and removal of
the knife
The knife can be easily removed and
installed for maintenance.
(
Section "11.5.1 Removal and installati-
on of the knife", p. 134
).
9.15 Adjusting the sheet sensors
The sheet sensors should be positi-
oned approx. 3-5 mm below the
baking sheets. The sensors can be
easily adjusted in height manually
using the fixing nuts.
If a sheet passes the sensor and it
does not light up yellow, either:
• the distance to the sheet is too great,
• the baking sheet is very crooked or
• the sensor is defective.
To check the functionality of the
sensors, you can place a metallic
object on the sensor. The sensor
should light up yellow when the
metallic object is placed there.
Sheet sensor
Rear
Baking sheet
Dough sensor
Sheet sensor
Front