Janssen F Series, Руководство по эксплуатации

Страница: 66 / 315

64
We recommend that type 2 and
type 3 surge protection be
provided by the customer!
If you have the correct voltage with
the appropriate power socket, you can
make a test run with the machine. If
the machine starts to run in reverse,
stop the machine immediately and
unplug the power cord from the power
socket. The machine is connected
clockwise. This clockwise rotating
field connection must not be manipu-
lated.
If necessary, have an authorized
electrician connect your power
socket correctly!
8.1 Qualifications of personnel
The work described in these operating
instructions in connection with the
electrical equipment of the Janssen
cookie formers is intended exclusively
for
•
Instructed personnel.
•
Qualified electricians
or persons
instructed by qualified electricians
who, with appropriate training,
education and experience, are able to
identify risks and prevent hazards that
may be caused by electricity.
•
Qualified application programmers
and
software engineers
who are
familiar with the relevant safety
concepts for automation technology
and the applicable standards and
other regulations.
8.2 Requirements and safety
The operator is responsible for the
intended use of the Janssen cookie
moulding machine.
Manipulation (e.g. removal) of the
existing protective devices (e.g. safety
switches, protective grids, covers) is
not permitted.
8.3 Electrical installation
Our machines of the F250, F450 and
F600 series require a 20 Amp 3Y
120/208V/AC, 4 pole, 5 Wire receptacle
(Mennekes part No. 520R9W) mains
connection socket.
Before connecting the machine, make
sure that your power grid provides a
voltage of 3Y 120/208V/AC, 4 pole, 5
wire.
Observe the type platoon your
machine.
8 Initial commissioning/ start-up