Janssen F Series Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 315

Janssen F Series Скачать руководство пользователя страница 14

12

1.1 Purpose

This documentation contains impor-
tant information on the proper use and
safe operation of the cookie moulding
machine for the following life phases
of the machine:

• Delivery, in-house
transport, unpacking
• Connection conditions
• Storage conditions
• Installation conditions
• Assembly, installation and
initial commissioning
• Operation, use
• Cleaning/ decommissioning
• Inspection and maintenance
• Disassembly
• Disposal

1 Information on these operating instructions

1.2 To whom is this manual

addressed?

This manual is intended for:

• Operating personnel:

The operating personnel must have
been instructed on the machine and
have access to the manual.

• Specialist personnel:

The specialist personnel have
appropriate technical training which
enables them to correct faults and
carry out maintenance. Instructions
for maintenance can be requested
separately.

1.3 Information for the operator

Please pay special attention to the
safety-relevant sections!
You are also required to observe the
relevant country-specific accident
prevention regulations, safety
regulations and occupational health
rules.

1.4 Further applicable documents

In addition to these operating instruc-
tions, there are further instructions
for the quick start, repairs, spare
parts and similar.

1.5 Availability

The operating instructions are
provided on delivery in printed form
and, on request, also in digital form.

1.5.1 Storage

Please keep the operating instruc-
tions in a safe place and ensure that
they are always available at the place
of use. They must be read, understood
and observed by the user.

«
...
12
13
14
15
16
...
»

Содержание F Series




























































































































































































































































































































Отзывы:

Нет отзывов