Janssen F Series, Руководство по эксплуатации

Страница: 77 / 315

75
Roller installation:
Proceed in the following order for roller installation.
Step 1:
Open the roller lock by turning the levers forwards
(
position 1
).
Step 2:
First place the kneading roller and then the pattern roller
onto the positioning pins.
Step 3:
Now turn the roller lock with the quick release system 180°
to the right (
position 2
). To allow the driving pins to engage
in the guide grooves of the roller, turn the roller a bit while
tensioning with the roller locks. Both rollers are fixed
optimally if the locking lever is positioned exactly horizon-
tal.
Roller removal:
To remove the rollers, proceed in
reverse order.
Drive pin
Positioning pins
for the rollers
Roller lock
Position 1
Position 2
33
2
1