manualshive.com logo in svg

Janssen F Series, Руководство по эксплуатации

Поделиться
Скачать
Janssen F Series Скачать руководство пользователя страница 178

176

14.7 Safety device faults

11) The "Info-error" lamp
      lights up blue 
      (Compact controller) 
      or the red warning
      window appears 
      ("Performance
      controller")

1) The hopper grid and hopper are 
open.

1.1) The safety switch of the hopper 
grid is defective or set incorrectly.

2) An EMERGENCY STOP button is 
activated.

2.1) An EMERGENCY STOP button is 
defective.

3) The conveyor belt cartridge is not 
inserted or not inserted correctly.

1) Close the hopper grid and hopper and 
press the enable button.

1.1) Replace or correctly adjust the safety 
switch on the hopper grid.

2) Deactivate the EMERGENCY STOP button 
and press the enable button.

2.1) Replace EMERGENCY STOP button.

3) Insert the conveyor belt cartridge 
correctly and press the enable button.

Содержание F Series




























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды